UTStarcom UTS 702 U, User Manual

Page: 51 / 105

3-8 Address book 702 U User Manual
2. Use the navigation key or to reach Add Entry and press the
left soft key ( Ok ) to select.
3. Enter the person’s name (up to 12 letters) by pressing the keys on the
phone or leave blank if desire. Press the left soft key ( Ok ) to
enter. If no name is entered, the phone number is use for the name.
4. Enter the phone number (up to 24 digits) by pressing the keys on the
phone and then press the left soft key (Ok) .
If you do not enter a phone number, “ Error ” is displayed on the
LCD screen of the phone.
If the LCD display flashes “ Exists ” after you enter a number it
means there is already an entry with the exact same name and
phone number stored in the phone’s memory.
5. Choose a Group by pressing or and then press the left soft
key (Ok) .
6. The phone enters the information and displays the new entry in the
address book. Press the left soft key ( Details ) to show the
particulars of the new entry.
7. Press the right soft key ( Exit ) or ( End ) to exit the menu
and return to stand-by mode.
Note: The address book information can be changed, deleted or lost if the
following occurs:
Discharge of static electricity or electrical noise strikes the
phone.
The phone is brought to the service center for repair.
Fully discharged.
No battery for an extended period of time.
3.4 Making a Call Using a Stored Phone Number
Addresses
x
x x
x
Search
x
x x
x
Enter Name
x
x x
x
Send Key
1. Press the right soft key (Addresses) to access the menu
options.