UTStarcom UTS 702 U, User Manual

Page: 22 / 105

702-U User Manual Before Using Your Phone 1-9
7. Be sure to charge the new battery for a minimum of four hours and reset
the time and date on the phone.
1.6 Battery Charging
1.
Connect the charger plug to the charging jack on the bottom of the
handset
.
(
Note : Charging the battery with phone on is less efficient than charging with the phone
off
.
2. Plug the charger into (110/220V AC) wall
outlet the battery indicator starts to scroll and
the texts “
Charging… ” is displayed on the
LCD screen when the phone is off. If the phone is on the “ Charging… ”
is removed from the LCD screen.
3. The battery is fully charged when the battery indicator stops scrolling,
and the texts “ Fully Charged! ” is displayed on the LCD screen when
the phone is off.
4.
Disconnect the charger from the AC outlet and the phone
.
( ( ( (
Note:
Before using the phone for the first time, charge the battery for a minimum of
four hours.
When the LCD displays , the phone should be recharged.
When the battery is running out of power and only few minutes of talk time
remains, a warning tone is heard and “
Charge ” is flashed on the display. When
there is no more talk time the phone switches itself off.
In order to maintain good operating times, fully discharge the battery from time to
time by leaving the phone switch on until it turns itself off.
The phone can be used to make and receive calls while charging if the phone is
on.