X2-3232: Modular Matrix Switcher 32x32
U.T.E. electronic GmbH & Co. KG
53
www.ute.de
Command
Description
Feedback
USER/O/[x]:0833%;
Set the resolution of output [x] to
1440x900P@75Hz.
Resolution
Ou01 1440x900 P
USER/O/[x]:0837%;
Set the resolution of output [x] to
1920x1200P@60Hz.
Resolution
Ou01 1920x1200
USER/O/[x]:0839%;
Set the resolution of output [x] to
1600x900P@60Hz.
Resolution
Ou01 1600x900
Examples:
1.
Switch signal from an input channel to all output channels: [x]All.
Example: Send
“3All.” to transfer signals from the input 3 to all output channels.
2.
Switch all input signals to corresponding output channels respectively: All#.
Example: If this command is carried out, the status of matrix will be:
1->1, 2->2, 3->3, 4-
>4…… 8->8….
3.
Switch off all the output channels: All$.
Example: After running this command, there will be no signals on all the outputs.
4.
Switch off the detail feedback command from the COM port: /:MessageOff;
But, it will leave the “switch OK” as the feedback, when you switch the matrix.
5.
Switch on the detail feedback command from the COM port: /:MessageOn;
It will show the detail switch information when it switch.
Example: when switch 1-
>2, it will feedback “AV01 to 02”.
6.
Switch signal from an input channel to corresponding output channel: [x]#.
Example: “5#.” to transfer signals from the input 5 to the output 5.
7.
Switch off an output channel: [x]$.
Example:
“5$.” to switch off the output 5.
8.
Switch signal: [x1] B[x2].
Example: “12B12,13,15.” to transfer signal from the input 12 to the output
No.12,13,15.
9.
Inquire the input channel to the output channel [x]: Status[x].
Example: Send
“Status3.” to inquire the input channel to the output 3.
10.
Inquire the input channel to the output channels one by one: Status.
Example: “Status.” to inquire the input channel to the output channels one by one.
11.
Save the present operation to the preset command [Y]: Save[Y].
Example: “Save7.” to save the present operation to the preset command No.7.
