X2-3232: Modular Matrix Switcher 32x32
U.T.E. electronic GmbH & Co. KG
24
www.ute.de
4. Button Control
The matrix can be rapidly controlled with its front panel buttons. To switch AV signal,
please operate the buttons under the following format:
Format:
“
Input Channel
” + “
AV
” +“
Output Channel
”+“
Enter
”
Notes:
⚫
“Input Channel”: Fill with the number of input channel to be controlled,
⚫
“Output Channel”: Fill with the number of output channels to be controlled. Press “All”
to select all the outputs.
⚫
Use “,” button to separate multiple I/O channels, and press “ENTER” button to
confirm the operation.
⚫
The input/output channels on the rear panel are counting from left to right, top to
bottom.
⚫
The input delay time between two numbers of every input & output channel must be
less than 5 seconds; otherwise the operation will be cancelled.
Example:
⚫
To transfer input 1 to output 11, press input
“1”, output “1” “1” and “Enter”.
⚫
To transfer signals from input 1 to all output channels, press buttons in this order:
“1”,
“All”.
Other Functional Buttons:
Buttons
Description
Operation
UNDO
return to the previous
status
Status 1: Input 6 -> output 6
P
ress input “6” + “AV”+ output 4 to change
the connection. Press
“Undo” to return to
Status 1.
Backspace the last
operation
If you press buttons
“1”, “AV”, “2”, “
” in
order, then
“2” will be canceled.
THROUGH
Get straight I/O
connection, e.g. input 1->
output 1, input 2-> output
2.
Format:
“Input Channel” + ”Through”
If you press buttons
“ALL”, “THROUGH” in
order, then the result will be like input 1
→
output 1, input 2
→
output 2, input 3
→
output
3
… input 16
→
output 16.
