UTE X2-3232 User Manual Download Page 25

Page: 25 / 84

X2-3232: Modular Matrix Switcher 32x32

U.T.E. electronic GmbH & Co. KG

www.ute.de

2.3.5.1. X2-4I-BT: 4K HDBaseT input card

4K HDBaseT input card with 4 HDBT, 4 RS232 and 4 external stereo audio ports.

X2-4I-BT

⚫

Supports HDBT 1.0, HDMI 1.4 and HDCP 1.4.

⚫

Input resolution is up to 4Kx2K, and supports 1080P 3D.

⚫

It is used with HDBaseT transmitter to extend video signal, and the transmission
distance can up to 70 meters at 1080P, or 40 meters at 4Kx2K.

⚫

Features 4 RS232 ports for two-way RS232 pass-through.

⚫

The RS232 baud rate supports 2400, 4800, 9600, 19200, 38400, 57600,115200.

⚫

Supports 4 external stereo audio inputs and audio channel control.



Note:

When the X2-4I-BT input card is used with the 1080P output card, the video

resolution must be set to 1080P to ensure reliable output.

2.3.5.2. X2-4O-BT: 4K HDBaseT output card

4K HDBaseT output card with 4 HDBT, 4 RS232 and 4 external stereo audio ports.

X2-4O-BT

⚫

Supports HDBT 1.0 and HDCP 1.4.

⚫

Output resolution is up to 4Kx2K, and supports 1080P 3D.

⚫

It is used with HDBaseT receiver to extend video signal, and the transmission
distance can up to 70 meters at 1080P, or 40 meters at 4Kx2K.

⚫

Features 4 RS232 ports for two-way RS232 pass-through.

⚫

The RS232 baud rate supports 2400, 4800, 9600, 19200, 38400, 57600,115200.

⚫

Supports 4 external stereo audio outputs and audio channel control.

Summary of Contents for X2-3232




















































































Search results

Summary of Contents for X2-3232

Reviews:

Brands by name

Popular brands

UTE X2-3232, User Manual

Search results

Summary of Contents for X2-3232

Reviews:

Brands by name

Popular brands