UTE X2-3232 User Manual Download Page 36

Page: 36 / 84

X2-3232: Modular Matrix Switcher 32x32

U.T.E. electronic GmbH & Co. KG

www.ute.de

6.3.2. System Control Command

Command

Description

Feedback

/*Type;

Get the system model.

xxxxx

/%Lock;

Lock front panel buttons.

System Locked!

/%Unlock;

Unlock front panel buttons.

System Unlock!

/^Version;

Get the firmware version.

Vx.x.x

/:MessageOff;

Disable feedback message

Closed The
Message Return.

/:MessageOn;

Enable feedback message (Default)

Enabled The
Message Return.

Undo.

Cancel the previous operation

Undo

Demo.

Switch to testing mode, switch AV 1>1, 2>2
and so on...

Demo Mode
AV: 01->001
… …

PWON.

Power on the system.

PWON

PWOFF.

Turn the system to standby mode.

PWOFF

/V00.

Get the backboard software version.

Vx.x.x

%0911.

Restore factory default.
All I/O connection will be restored to
straight through: 1->1, 2-

>2… saved

operation status will remain the same.

Summary of Contents for X2-3232




















































































Search results

Summary of Contents for X2-3232

Reviews:

Brands by name

Popular brands

UTE X2-3232, User Manual

Search results

Summary of Contents for X2-3232

Reviews:

Brands by name

Popular brands