X2-3232: Modular Matrix Switcher 32x32
U.T.E. electronic GmbH & Co. KG
28
www.ute.de
6.3. RS232 Communication Command
With this command system, users are able to control and operate the matrix with
RS232 software remotely.
Notes:
⚫
Please disconnect all the twisted pairs before sending command EDIDUpgrade[X].
⚫
In the commands, “[”and “]” are symbols for easy reading and do not need to be
typed in actual operation.
⚫
Please remember to end the commands with the ending symbols “.” or “;”.
⚫
Type the command carefully, it is case-sensitive.
⚫
Commands pertaining to EDID only avails for signal cards that support EDID
management.
⚫
The matrix boasts 6 in-built EDID data, the chart below illustrates the detailed
information:
No.
Detailed Information
1
1080P 2D 5.1CH
2
1080P 2D 2.0CH
3
720P 2D 5.1CH
4
720P 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH
Update in-built EDID data by sending command UpgradeIntEDID[x]..
6.3.1. Communication protocol:
RS232 Communication Protocol:
•
Baud rate: 9600;
•
Data bit: 8;
•
Stop bit: 1;
•
Parity bit: none.
