manualshive.com logo in svg

Utax CLP 3635, Instruction Handbook Manual

The Utax CLP 3635 Instruction Handbook Manual is a comprehensive guide that provides step-by-step instructions on how to operate and maintain the Utax CLP 3635 printer. This essential manual is available for free download on manualshive.com, ensuring easy access to all the necessary information you need to optimize your printing experience.

Share
Download
background image

5-4

Maintenance 

Replacing the Toner Container

This section explains how to replace the toner containers. When 
replacing the toner container of any color, always replace the waste toner 
box at the same time. If this box is full, the printer may be damaged or 
contaminated by the waste toner that may spill over the box. 

IMPORTANT  

During toner container replacement, temporarily move 

storage media and computer supplies (such as floppy disks and USB 
memorys) away from the toner container. This is to avoid damaging 
media by the magnetism of toner.

IMPORTANT  

Always clean the inside of the printer after replacing the 

toner cartridge. For details, refer to 

Cleaning the Printer on page 5-8

.

IMPORTANT  

UTAX GmbH 

is not liable against any 

damages or problems arising from the use of toner containers other 
than those designated as original 

UTAX

 toner containers. For 

optimum performance, it is also recommended to use only the 

UTAX 

toner containers which are specifically intended for use 
in your country or region. If the toner container for another 
destinations is installed, the printer will stop printing.

To replace the toner container, first make sure of the color of the toner 
container requiring replacement. In this example, it is assumed that you 
are replacing the yellow toner container.

1

Open the top cover (top tray).

2

Carefully remove the old toner container from the printer.

CAUTION  

Do not attempt to incinerate the Toner 

Container. Dangerous sparks may cause burns.

Note  

You do not have to turn printer power off before starting the 

replacement. Any data that may be processing in the printer will 
be deleted if you turn the printer power off.

Top Cover 
(Top Tray)

Summary of Contents for CLP 3635































































































































































































































Reviews:

No comments

Related manuals for CLP 3635

QMS 1660 Operation preview
1660
Brand: QMS Pages: 122
QMS 1660 Reference Manual preview
1660
Brand: QMS Pages: 306
Xerox WorkCentre Pro 40 Specification preview
WorkCentre Pro 40
Brand: Xerox Pages: 14
Magicard Tango 2e Brochure preview
Tango 2e
Brand: Magicard Pages: 2
Magicard Tango 2e Quick Start Manual preview
Tango 2e
Brand: Magicard Pages: 2
Partner RP-330 Technical Manual preview
RP-330
Brand: Partner Pages: 81
Felix printers Pro 2 Touch Quick Start Manual preview
Pro 2 Touch
Brand: Felix printers Pages: 28
Valentin Compa II Series Operating Manual preview
Compa II Series
Brand: Valentin Pages: 110
Aficio dsc424 Operating Instructions Manual preview
dsc424
Brand: Aficio Pages: 156
Xerox WorkCentre WC7545 Finisher Install Manual preview
WorkCentre WC7545
Brand: Xerox Pages: 8
Thermo Scientific invitrogen EVOS FL Quick Reference preview
invitrogen EVOS FL
Brand: Thermo Scientific Pages: 6
Gestetner F9199 Operating Instructions preview
F9199
Brand: Gestetner Pages: 4
OmniPrint OM9300F Technical Manual preview
OM9300F
Brand: OmniPrint Pages: 23
Custom Audio Electronics KPM 216 H User Manual preview
KPM 216 H
Brand: Custom Audio Electronics Pages: 88
Citizen CT-S251 User Manual preview
CT-S251
Brand: Citizen Pages: 255
Sam4s GIANT-100 User Manual preview
GIANT-100
Brand: Sam4s Pages: 24
Xerox Phaser6121MFP Quick Use Manual preview
Phaser6121MFP
Brand: Xerox Pages: 16
Epson Stylus C66 Brochure & Specs preview
Stylus C66
Brand: Epson Pages: 8

Brands by name

Popular brands

Load more brands