Utax CD 1018, Instruction Handbook Manual

Page: 72 / 86

Troubleshooting
6-6 OPERATION GUIDE
Send error.
####
3101 : SMTP Authentication error. Consult with your
network administrator to verify that the Login Account
Name and Login Password required for SMTP
Authentication are correct.
The SMTP server or FTP server is not operating
properly. Check with your network administrator.
Advanced
Operation
Guide
This key is not registered. An unregistered one-touch key was chosen. Select the
correct one-touch key. —
Toner low. Toner is running low. Replace the toner container using a
new toner kit as soon as possible. page 5-1
Waste toner near full. Remove the process unit from the machine. Gently
shake the process unit horizontally a few times. Reinstall
it into the machine. The machine will stop printing soon,
contact your service representative or authorized service
center. —
Waiting to scan. The memory to execute the job is insufficient. The job will
be automatically resumed, after the memory capacity to
execute is available. If you want to cancel the job, press
left
Select .
—
Wrong account ID. When job accounting is enabled, the account ID was
already registered. Enter the correct account ID. Advanced
Operation
Guide
Wrong password. When user login is enabled, an incorrect job accounting
password was entered. Enter the correct password. Advanced
Operation
Guide
Wrong user ID. When the user management setup (User Login) is
enabled an incorrect user ID was entered. Enter the
correct user ID. Advanced
Operation
Guide
Message Procedure Reference
2GM_UTAX_ENG_OG.book 6 ページ ２００５年３月４日 金曜日 午後９時４５分