Utax CD 1018, Instruction Handbook Manual

Page: 38 / 86

Preparations
3-4 OPERATION GUIDE
Network Settings
Registering the IP Address
Check the IP address with your network administrator before performing this setting.
This will only function if the DHCP setting is Off and the TCP/IP setting is On. Any
changes made to the network settings will become valid after you turn the power to
the machine off and then back on again.
To manually register the IP address.
1
Access IP Address .
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Use the numeric keys to enter each segment of the IP address in turn,
pressing
X
or [*.] to move between segments.
3
Press Enter on completion.
If you make an error in entering a portion of the IP address, press
W
to return to
the previous block of digits and re-enter the correct number.
4
Register the Subnet Mask - refer to Registering the Subnet Mask on page 3-4.
Registering the Subnet Mask
1
Access Subnet Mask .
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Use the numeric keys to enter each segment of the Subnet Mask in turn,
pressing
X
or [*.] to move between segments.
3
Press Enter on completion.
If you make an error in entering a portion of the Subnet Mask, press
W
to return
to the previous block of digits and re-enter the correct number.
4
Register the Default Gateway - refer to Registering the Default Gateway on
page 3-5.
System Menu/
Counter
S
or
T
System Setting
Enter
S
or
T
Network Setting
Enter
S
or
T
TCP/IP Setting
Enter
S
or
T
IP Address
Enter
System Menu/
Counter
S
or
T
System Setting
Enter
S
or
T
Network Setting
Enter
S
or
T
TCP/IP Setting
Enter
S
or
T
Subnet Mask
Enter
2GM_UTAX_ENG_OG.book 4 ページ ２００５年３月４日 金曜日 午後９時４５分