Programming
49
Chapter 4
Programming
4.1 Introduction
Sprint iQ ships with several factory-installed programs with
default parameters. These may be kept or changed by the user to
suit the actual testing requirements. Please note that not all test
types are available in every tester.
You can modify factory-installed programs in any way that is
available with the features installed in the tester.
Values stored in factory-installed programs need to be modified to
the particular product to be tested. Use the preset values as a
starting point in programming.
This section explains programming highlights of the following
types of tests:
• Decay (Pressure or Vacuum)
• Back-Pressure Flow
• Occlusion
• Flow Measurement
• Leak Check using Flow
• Burst
• Creep (a subset of burst testing)
• Crack (similar to burst testing, but with two sensors)
