![background image](http://html1.mh-extra.com/html/usag/447-t/447-t_operatinginstructions-and-maintenance_1063952020.webp)
447 T
DISPOSITIVO PNEUMATICO
PER SMONTAGGIO E MONTAGGIO AMMORTIZZATORI
PNEUMATIC DEVICE FOR ASSEMBLING AND
DISASSEMBLING SHOCK ABSORBERS
SWK Utensilerie S.r.l. Via Volta 3; 21020 Monvalle (VA) – Italy
Tel +39/0332/790111 Fax +39/0332/790602 Internet: www.usag.it www.usag-tools.com E-mail: [email protected]
20/28
IT
A
LI
A
N
O
E
N
G
LI
S
H
11 FUNCTIONING AND USAGE
After having finished to assemble the machine and connect it to the air compressed
system, the machine can work.
The machine is supplied with the shaft high. Press the foot control lever to lower it and to
positioning the machine ready to work.
Install the right bracket in order to disassembling the shock absorber that has to be
dismounted (see page 25, position F).
11.1 Disassembling
It is advisable to unlock the nuts of shock
absorbers’
caps
before
using
the
machine 447 T in order to easy working
operations.
Some
automotive
manufacturers
prescribe to unlock the blocking nuts of
the caps before dismounting the shock
absorbers from the car.
Positioning the shock absorbers on the
lower bracket in the first coil (fig. 1), rotate
the shock absorber and lock it in the
bracket in the maximum slipping
point (fig. 2).
Put the small arms near the spring and
insert the upper vices in the first coil
available (see fig. 3).
After having found the right position of the
spring on the bracket and after having
adjusted the upper vices,
block the
adjustable arms
(fig.4) locking the screws
behind the case with the key supplied.
Fig. 3
Fig. 3
Fig. 1
Fig. 2
Fig. 4
Fig. 3