![background image](http://html1.mh-extra.com/html/usag/447-t/447-t_operatinginstructions-and-maintenance_1063952018.webp)
447 T
DISPOSITIVO PNEUMATICO
PER SMONTAGGIO E MONTAGGIO AMMORTIZZATORI
PNEUMATIC DEVICE FOR ASSEMBLING AND
DISASSEMBLING SHOCK ABSORBERS
SWK Utensilerie S.r.l. Via Volta 3; 21020 Monvalle (VA) – Italy
Tel +39/0332/790111 Fax +39/0332/790602 Internet: www.usag.it www.usag-tools.com E-mail: [email protected]
18/28
IT
A
LI
A
N
O
E
N
G
LI
S
H
The pictograms are integral part of the product. In case of loss, deterioration or
illegibility, require the pictograms to the constructor in order to substitute them
immediately. Replace the pictograms always in the same place where they were
removed following the above design.
05 CARRIAGE - HANDLING
The machine weights Kg. 46. It is necessary to use a trolley for handling and carriage.
Fix the package at the trolley through straps in order to balance it.
Handle with care in order to avoid to upset and to make the package of
380x220x1600 mm falling, causing danger both for the person responsible of the
handling and for the staff near the spot.
06 UNPACKING
The machine is packed in a cardboard box of 380x220x1600 mm and closed by metal
clips.
On the package there are arrows indicating how to handle the box.
Lay down the package in order to unpack the machine.
Remove the metal clips carefully on the top of the box and unpack the machine
slipping it out of the package.
Inside the box there are components and
accessories of the machine. Pay attention, not
throw them with the package.
It is recommended not to leave packaging parts to the range of children. Throw the
package in appropriate spots.