![background image](http://html1.mh-extra.com/html/usag/447-t/447-t_operatinginstructions-and-maintenance_1063952016.webp)
447 T
DISPOSITIVO PNEUMATICO
PER SMONTAGGIO E MONTAGGIO AMMORTIZZATORI
PNEUMATIC DEVICE FOR ASSEMBLING AND
DISASSEMBLING SHOCK ABSORBERS
SWK Utensilerie S.r.l. Via Volta 3; 21020 Monvalle (VA) – Italy
Tel +39/0332/790111 Fax +39/0332/790602 Internet: www.usag.it www.usag-tools.com E-mail: [email protected]
16/28
IT
A
LI
A
N
O
E
N
G
LI
S
H
01 DESCRIPTION
The machine for assembling and disassembling shock absorbers, model 447 T, is made
up of a painted metal tubular frame. On this structure is mounted a pneumatic piston
fixed at the frame, its extension and compression allows the compression and the
release of the spring held by control brackets.
02 USAGE
The machine 447 T is a device for assembling and dissasembling the shock absorbers of
the cars. Every different use is considered improper and illogical. The manufacturer
does not assume responsibility for possible damage caused by non-compliance with
instructions.
04
TECHNICAL DATA
Air pressure
Min 6 bar, Max
10 bar
Power
735 Kg (6 atm)
1.226 Kg (10 atm)
Cylinder stroke
420 mm
Dimensions
139 x 45 x 47 cm (mounted)
Machine weight without clamps
40,3 Kg
Art. 447 TC1 (Small clamp)
Ø 78÷130 mm (Weight 3,6 Kg)
Art. 447 TC2 (Big clamp)
Ø 125÷205 mm (Weight 4,2 Kg)
Art. 447 TA (Vice)
Weight 3,7 Kg
04 INSTRUCTIONS AND WARNINGS
The usage of this machine model 447 T required a particular attention. Compressed
springs can be potential dangers due to force collected because of compression.
This machine must be used always with its specific frontal protection mounted correctly
on the frame.