US drives PHOENIX EX, Instruction Manual, Page: 123 / 172

DRIVE PROGRAMMING 4-69
will be shown on the text field (upper row). When the Enter
key is hit, the chosen text will be the text for M00P20 and
the M11P32 text field will revert to show TEXT FOR M00P20.
Note: When [0] is selected the M00P20 text is the text of
the parameter assigned to M00P20.
[0] *
[1] CURRENT
[2] CURRENT (Can be edited using Drive Master)
[3] FEEDBACK
[4] FLOW
[5] FREQUENCY
[6] INPUT
[7] LOAD
[8] OUTPUT
[9] POWER
[10] PRESSURE
[11] REFERENCE
[12] SETPOINT
[13] SPEED
[14] TEMPERATURE
[15] TENSION
[16] TORQUE
[17] VOLTAGE
[18] VOLUME
[19] STATUS
[20] MODE
*Text is the text of the parameter assigned to M00P20.
M11P33 DRIVE MODEL NO
Indicates the drive model number.
R-W Range:
Default:
M11P34 VOLTAGE RATING
Indicates the voltage rating of the drive.
[0] 200 – 250V = Low voltage range
[1] 380 – 500V = Standard voltage range
[2] 500 – 600V = High Voltage
R-O Range: [0] to [2]
Default:
M11P35 OVERLOAD RATING
Indicates maximum overload current in Amps of the drive.
Note:

For dual rated drives, the overload rating is 1.2 times
the VT Output Current Rating for the given drive
model listed in tables 1-1 thru 1-3.

For VT only rated drives, the overload rating is 1.2
times the Output Current Rating for the given drive
model listed in tables 1-1 thru 1-3.

For CT only rated drives, the overload rating is 1.5
times the Output Current Rating for the given drive
model listed in tables 1-1 thru 1-3.
R-O Range:
Default:
M11P36 FACTORY DEFAULTS
[0] NO
[1] YES To set all parameter to the factory defaults
R-W Range: [0] to [1]
Default: NO
M11P37 ACCESS CODE
User to enter access code to unlock parameter editing.
For more details refer to section 3.4.8
R-W Range: 0 to 10000
Default: 0