56
DS1060-102A
Tap the word
Screen Saver
. A window opens in which you can activate the mode and select the type.
22.5 HOW TO CONFIGURE NETWORKS AND CONNECTIONS
To con
fi
gure networks and connections:
Turn on the screen, if off, by tapping it at any point or by pressing the centre button on the 1060/31 Monitor.
Tap the icon
to access the Top Page.
Tap the icon
to go to the general con
fi
gurations page:
Tap the writing
All Settings
. A new window opens that lists the available networks. The settings of the network
identi
fi
ed as ETH0 must not be changed. You can enable or disable all other networks, or connections, with
the
ON/OFF
switch and then con
fi
gure them. When you tap the name of a network or link, a pop-up window
opens where you can enter and change the network parameters, as shown below.
22.5.1 Wi-Fi NETWORK
The Wi-Fi network is used to create a wireless connection between the monitor and a LAN (with Internet access).
After controlling a network scan and selecting a network, the parameters to enter are:
Password of the selected Wi-Fi network.
IP address of the device.
IP address of the router.
Network mask.
If all the parameters have been entered correctly, at the top right you will see another icon
in addition to
that already present for the network.
•
•
•
•
•
•
•
•
•
Summary of Contents for 1060/601
Page 66: ...66 DS1060 102A...
Page 67: ...67 DS1060 102A...
