10
DS1060-102A
6.1 DESCRIPTION
OF
TERMINALS
SE+
}
Terminal pins of discharge electric lock with holding current for relay, if present
SE-
C
Common contact for garage gate opening
}
SE2
NC
Normally closed contact for garage gate opening relay
NO
Normally open contact for garage gate opening relay
V-
}
Auxiliary power terminals
V+
]
ILL
Not used
]
PA
Hall button terminals for electric lock control
]
SP
Not used
V5
Not used
V3
Not used
]
AD/ILA
Not used
EXP Not
used
LAN
Ethernet connector for LAN RJ45
I2C DIGITAL Not used
CONNECTOR
Use Urmet 1039/101 RJ45 connectors for connections.
7 MONITOR
INSTALLATION
It is possible to
fi
x the wall bracket by using a 503 box and the supplied screws, or a Ø 60 mm box with suitable
screws.
1,50 m
Box 503
1,50 m
Box Ø 60 mm
Connect any extra ring tone,
fl
oor call and auxiliary power function wires to the terminals on the external
printed circuit.
Connect the monitor to the connector CN1 on the printed circuit board via the cable provided on the back of
the monitor.
Move the monitor close to the bracket by centring the special
fi
xings (1) and slide it down to reach its stop
(2).
1
2
•
•
•
•
Summary of Contents for 1060/601
Page 66: ...66 DS1060 102A...
Page 67: ...67 DS1060 102A...
