9.4 Cyclone
Removal
In order to remove the Cyclone, you must first release the filter cassette by pressing the red “up” button
on the electronics box. Refer to Section 7.1.3 to remove the filter cassette cartridge. After removing the
filter cassette remove the black electronics box. Note that the box does not have to be completely
removed, but it is recommended for ease of Cyclone Removal.
Proceed by unscrewing the ring that connects the cyclone to the inlet tee, as shown below. Then, lift up
and carefully remove the cyclone and cassette manifold body.
Catch Cup
9.5 Mass Flow Controller (MFC)
The Mass Flow Controller can be removed from the Pump Enclosure by following the directions below.
•
Remove the six (6) small screws from the front panel. The door will slide down and off.
60
•
Remove the hose that connects to the front of the MFC (and runs to the Airline port on the
enclosure wall), as shown.
