4.7.4 View
operators
Operator Initials
Primary: 1-ABC
Backups: 2-AAA 3-
32
Pressing
←
F3
at the third Main Menu will allow you to view the Operator
Initials currently stored. This screen only allows you to view operators, not
change operators or edit operator information.
ENTER=Back
4.8 Main Menu (4 of 5)
4.8.1 Overview
F1=View Elap. Time
F2=View Gain/Offset
The fourth Main Menu allows you to View Elapsed Time and View
Gain/Offset by pressing the appropriate keys. Pressing the
→
F4
key
proceeds to the fifth and final Main Menu, whereas pressing the
ENTER
key will return to the third Main Menu.
F4=More ENTER=Back
4.8.2 View
Elapsed
Time
Elapsed Time
[1] 25 minutes
[2] 25 minutes
Pressing
↑
F1
at the fourth Main Menu brings you to the View Elapsed
Time screen. On the right, the screen shows that both Module C [1] and
collocated Module C [2] have had samples with 25 minutes elapsed time.
ENTER=Back
4.8.3 View
Gain/Offset
Gain Offset
[1] 0.000 0.010
[2] 0.000 0.000
Pressing
↓
F2
at the fourth Main Menu brings you to the View Gain/Offset
screen. This shows the Gain and Offset values for any connected modules.
Pressing
ENTER
will return to the fourth Main Menu.
ENTER=Back
4.9 Main Menu (5 of 5)
4.9.1 Overview
F1=Site Config.
ENTER=Back
The fifth Main Menu allows you to run the Site Configuration procedure.
Press
↑
F1
to step through Site Configuration, or press
ENTER
to return to
the previous Main Menu.
