4.1.3
Cautions and Notices
•
Pressing
ENTER
to skip a process is optional but
not recommended
, as the software is tailored to
allow components time to warm up based on manufacturer specifications.
•
After using MENU MODE, make certain that the controller has returned to the AUTO MODE.
•
After completing the standard Filter Change, the software will reset and automatically return to
AUTO MODE.
•
Actual values obtained may differ from those shown in the Software “screenshots”.
4.2 Auto Mode
4.2.1
Current Status Screens
12/20/06 04:00pm WED
Next samp: COMPLETED
When the sampler is in AUTO MODE, the current status of the sampler is
displayed. The display shows whether the sampler is collecting, idling, or
waiting for samples. An example of auto mode is shown.
Sampler is OFF
The first line displays the current date and time. For this example, the date
is December 20th, 2006. The time is 4:00 pm. After the time, the day of
the week is listed, in this case Wednesday. The third line indicates the
sample status. The fourth line shows that the sampler is off.
12/20/06 04:05pm WED
Module:[1]
Flow: 22.00
26
This screen is the same as previously shown, except that it is displaying
that the sampler is currently on. At this time, the sampler is recording the
flow rate, temperature, and other parameters. Pressing
ENTER
will allow
you to authenticate and proceed to Menu Mode.
ET: 15
4.3 Menu Mode
The MENU MODE has a five screen main menu and several sub-menus. The Main Menu can be
accessed by pushing the
ENTER
key while the sampler is displaying the status in Auto Mode.
4.3.1 Authentication
Authorized use only
Please enter code:
_
When prompted with the Authorized Use screen the four digit code “1123”
should be entered.
4.3.2 Select/Modify
Operator
Now you are prompted to select the current operator. There is space for
one primary and two backup operators initials to be stored. To select an
operator, press the # key corresponding to the initials. To change the
operator initials, select the
→
F4
. These values all begin as blank until
edited for the first time. After selecting an operator, you will be presented
with the initial Main Menu.
Choose Operator
Primary: 1-ABC
Backups: 2-XXX 3-YYY
F4=Edit
