9.3 Electronics
Box
The black box located at the bottom-right of the Module C is known as the Electronics Box. This box
contains the electronics that control the Solenoid Manifold. To remove it for servicing, follow the steps
below.
•
First, remove the vacuum sensor tube by pressing in the quick-release adapter and lifting at the
same time. Next, reach behind it to remove the motor control cable by twisting the metal nut
counter-clockwise.
•
Then, remove the 12-pin controller cable from the bottom of the Module C (which is connects
through to the electronics box).
•
Then, unscrew the two gold-colored bolts in the front of the electronics box, as shown to the left.
•
The electronics box can now be removed, as shown.
59
