05
TECHNICAL SPECIFICATIONS
The “empty” signal doesn’t mean only that the bag is empty,
but also warns you that the system has shot at least 35 seconds.
For this reason is very important to make the “reset” only when you actually
exchange the bag or you will lose the seconds counting. (See paragraph 13)
Weight without tanks
Max fog emission in a single shot
Total fog emission capacity
Fog tanks capacity
Working time without mains power
Max power on heating system
Average power consumption during heating time
Max heating time
Max consumption at 12 V
Power consumption at 12 V
Battery type (not included)
Door tamper
Anti-tear off and anti-shift
22 Kg
1200 m
3
1400 m
3
2 x 600 ml
about 2,5 hours
2 x 300 W
540 W
about 2,5 hours
60 W
500 mA while shooting, 60 mA in stand by
Pb 2 Ah 12V
Tamper screw
Accelerometer
*
Industrial standard as from other
manufacturers
FAST 01 2C PRO PLUS
-
Loosened ferrule can cause dropping
-
Do not disconnect the machine immediately after the shot
-
Change the battery every two years
-
Change the cylinder as soon as the “empty” signal appears
WARNING:
5
