38
Problems
Reason
Solutions
9
10
11
13
12
The resin leaks from the right bottom
of the printer
Excessive printed part appears. Light
leaks outside the screen display area
Considerable size differences exceed
-
ing 1mm among the first several
layers or between the left and the
right of the printer
Printed model has ripples or wavy
lines on the side face
Oily liquid exuded from the seams
area in front of the label at the print-
er bottom, and the level of the liquid
in the coolant tank has significantly
reduced
Resin bottle not inserted into the right place
The top vent hole of the resin bottle has not
been pierced
Clean up the residual resin according to the
guidance and replace with a new resin bottle,
make sure the bottle is inserted all the way in
Pierce either top hole of the resin bottle with the
provided awl
Adjust the tightness of the lead screw nut and the
build platform holder according to the guide
Replace with new LCD cooling module or return to
the factory for repair.
Adjust the build platform parallelism according to
the tutorial video
Replace with new tape, cut and cover any exposed
area
Light-blocking tape is damaged
The bottom of the build platform and the LCD
panel are not parallel
Shaky Z axis
There is leak from the liquid cooling system
