Unitest Telaris 0100, Instruction Manual

Page: 47 / 108

English
Measurement Range Message Cause
RCD UB>UL Contact voltage has exceeded pre-
123
Ω
set limit, measurement
53V UL:50V interrupted.
RCD UB>UL Contact voltage has exceeded pre-
UL:50V set limit during the socket test.
ZL, IPSC UB>UL The contact voltage exceeded the
RCD --- pre-set limit already during the
UL:50V socket test. Measurement therefore not carried out
ZL, IPSC TELARIS 0100 is overheated,
RCD therefore no further
measurements can be carried out.
ZL, IPSC Socket incorrectly connected, or
RCD RCD has tripped.
ZL, IPSC Insert plug after turning it by
RCD 180°C.
All functions reference to limit excess within
one measurement variable.
All functions “ M ” Minimum one measurement result
has been stored in memory.
All functions Batteries are virtually empty and
have to be replaced.
Measurement results no longer
comply with the specifications.
All functions Batteries are empty. No funktion of the Telaris
is blinking
All functions
---
TELARIS 0100 is ready for measurement.
All functions
-
TELARIS 0100 is active (active measurement).
47
Display Indications / Error Messages