Unitest Telaris 0100, Instruction Manual

Page: 45 / 108

English
7.0 Deleting Stored Measurement Data / Display
of All Memory Entries
It is possible to delete data by using key „Delete"
(28). Furthermore, it is possible to display the total
number of measurement value entries on the dis-
play:
Display of Total Number of Measurement Value
Entries:
"
Set measurement range selection switch (24) to
one of the 5 measurements ranges.
" Briefly press „Delete” key (28). A short beep sig-
nal is audible.
" The total number of all measurement values that
have been saved is now displayed.
Delete Last Stored Measurement Value:
"
Set measurement range selection switch (24) to
one of the 5 measurement ranges.
"
Briefly press „Delete” key (28). A short beep sig-
nal is audible and the number of the memorised
measurement data is displayed.The total num-
ber of all stored measurement data is dis-
played.The display disappears after approxi-
mately 2 seconds.
"
Now release the key „Delete” (28) to avoid dele-
tion of all memory entries.
Deleting the last measurement value can be re-
peated as often as required, as long as data is
available within the memory.
Deleting all Stored Measurement Values:
"
Set measurement range selection switch (24) to
one of the 5 measurement ranges.
"
Press „Delete” key (28) for approx. 5 seconds.
Three short beep signals are audible. The num-
ber of all stored measurement values is dis-
played. The last stored value is deleted after 2
seconds. After 5 seconds, all values are delet-
ed.
„0" appears on the display. The memory is
completely deleted, the „M" symbol in the dis-
play disappears.
45
Deleting Stored Measurement Data / Display of All Memory Entries