Transistor-Servo-Drive TVD6.2-RS
6
Construction:
- cubicle-mount or 6HE-plug-in unit according to the
VDE- DIN- and EU- regulations.
- standard analog regulation electronics.
- power electronics for 5A, 10A, 16A and 25A.
- wide-band chopper supply unit for the auxiliary voltages.
- power supply unit on the back circuit board .
Galvanic isolation between
- power section and covering
- power section and regulation electronics
- regulation electronics and contol inputs
The leakage distances are according to the VDE regulations.
There are used:
- fully isolated six-pack IGBT-power semiconductors, generous
dimensioning.
- only industrial standard components are used
- All ICs with external connections are mouted on high-quality sockets
- LED displays
- 16 digit binary switches for PI-setup of the speed regulator
- precision trimers for fine adjustment
- plug-in jumpers for system setup.
Characteristics:
*
Direct power supply 400V~
*
Electronic starting current limitation
*
2 differential reference inputs
*
Accelleration and decelleration ramp with second nominal value
*
Speed and torque regulation
*
Static and dynamic current limit
*
Current nominal value output
*
Test connectors for current and speed
*
Galvanic isolated logic in- and outputs
*
Enable and end-switch logic
*
Integral disabling
*
Quick stop
*
Mains failure braking
*
Temperature control for motor and device
*
Parameter adjustments without soldering
*
10 pin control plug
*
Incremental encoder output
C
h
a
ra
cte
ris
tic