Transistor-Servo-Drive TVD6.2-RS
36
Function
1st nominal value 2nd nominal va-
lue
input amplifier
constant 1
1
input voltage
max.
±10V=
±10V=
differential input
jumper
S12 unplugged
S11 unplugged
input according to GND
jumper
S12 plugged
S11 plugged
input signal
X1:4
X2:17
input GND
X1:8
X2:28
measuring point control pin
X4:1
X4:2
measuring value
max.
±10V=
±10V=
integrator function
does not exist
jumper SW2
Input in relation to GND
Differential input
with nominal value potentiometer
with nominal value of SPS/CNC
with internal supply voltage
foreign external voltage
jumper S11, S12 plugged
jumper S11, S12 open
notice GND connection
signal- and GND-connection
exchangeable
default setup
Both nomimal values connected:
- 1st and 2nd nominal value are added internally
- notice signs
- sum of nominal values not over ±10V
Only with 2nd nominal value
-acceleration and deceleration-ramp linear integrator
2nd nominal value
jumper
Poti
range
without integrator
SW2 pos. 1-2
—-
——
with integrator
SW2 pos. 2-3
INT(P2)
0,1 up to 4,5sec.
without 2nd nom.value SW2 unplugged
—-
Nominal value current
nominal value from external supply 0 to ±20mA
internal compliance resistors 0 to max. ±10V
1st nominal value
resistor R121
2nd nominal value
resistor R4
Resistance value [
W
]
= nominal value voltage / nominal value current
(max. 500
W
)
N
o
m
in
a
l
V
a
lu
e
