United CoolAir VertiCool Classic Series, Engineering Manual

Page: 32 / 33

Engineering Guide
VertiCool ™ Classic
32 Subject to change without notice. 20.10-TD (0816)
EXAMPLE: VW
a b
8
c
G
d
3
e
AS
f
T
g
A
h
— A
j
— X
k
a� “VA”, “VW”, “VHW”, “E”, “BVA”, “BCVA”, “BVW” or “VCW”
“VA”
Air-Cooled Air Conditioner
“VW” Water-Cooled Air Conditioner
“VHW” Water Source Heat Pump
“E” Evaporator Section only as a prefix to any of the above
“BVA” Air-Cooled Condensing Section
“BCVA” Air-Cooled Condenser Section
“BVW” Water-Cooled Condensing Section
“VCW” Chilled Water Air Handler
b� “R” or “RC” Remote Condenser or Condensing Section Being Used
“R” Remote Condenser Unit being used
“RC” Remote Condensing Unit being used
c� “8”, “10”, “12”, “15”, “20”, “25”, “30” Nominal Cooling Capacity in Tons
d� “G” Common to all
e� “3”, “4” or “5” Indicates Voltage
“3” 208-230V, 3 PH
“4” 460V, 3 PH
“5” 575V, 3 PH
f� “AS”, “A” Quantity of Refrigerant Circuits
“AS” Indicates 1 Circuit
“A” Indicates 2 Circuits
g� “T” Cabinet Series
h� “A” Refrigerant Type
“A” R-410a
i� “05”, “10”, “15”, “20”, “25”, “30”, “45”
Indicates kW Rating for Heaters
j� “-A”, “-APF”, “-APT”, “-APR”, “-B”, “-BPF”, “-BPT”, “-BPR”, “-C”, “-D”
Indicates Air Path Configuration
k� “X” Special Configuration
Not all combinations of Basic Model Designations are valid. Check with the factory for correct model identification.
BASIC MODEL DESIGNATION