Engineering Guide
VertiCool ™ Classic
3
Subject to change without notice.
20.10-TD (0816)
UNIT FEATURES
• Air-Cooled, Water-Cooled, Chilled Water or Water Source Heat
Pump Configurations
• R-410a Refrigerant, Factory Charged
• 12 thru 30 Ton Units are Splittable using Resealable Refrigerant
Fittings
• Fits through 32” doorways
• ½” Fiberglass Lined Cabinet (Thermal/Acoustical, min� density of
2 Pounds)
• Rugged cabinet construction
• Duct Flanges Factory Installed
• Drain Connections on Both Evaporator and Condensing Sections
• 304 Stainless Steel “V” Style Drain Pan in Evaporator Section
• �25” ESP Capability (1” ESP Option for Evaporator and
Condensing Sections)
• Belt Driven Blowers (Evaporator and Condensing Sections)
• Ball Bearing Motors
• Resiliently Mounted Ball Bearings for Blowers
• Cast Iron Pulleys and Sheaves
• Variable Pitch Motor Sheaves
• All shafts, sheaves & pulleys keyed
• Adjustable Motor Mounts in Evaporator and Condensing Sections
• High (Manual Reset) and Low (Auto Reset) Refrigerant Pressure
Safety Switches
• Loss of Air Safety Switch (when electric heat used)
• Scroll Compressors
• Adjustable Expansion Valve with External Equalizer (MOP Type)
• Sight Glass / Moisture Indicators
• Filter Driers
• High and Low Side Schrader Access Fittings
•
Draw Through Air Flow Configuration
• Interlaced Evaporator Coils
• Single Electrical Control Box
• 24 Volt Control Circuits
• Transformer with Built In Circuit Breaker
• Individual Contactor for each Stage of Electric Heat
• Individual Contactor for each Motor and Compressor
• Co-axial Counter Flow Heat Exchanger(s) on Water-Cooled Units
• Limited Warranty 1 Year on Parts and 5 Years on Compressors
• Functionally Run Tested at the Factory
Product Features
The VertiCool™ Classic Series of units are splittable,
self-contained, floor mounted, single package units.
They are available as air-cooled, water-cooled or as
water source heat pump configurations. The units offer
a variety of evaporator air flow patterns for application
flexibility. Additionally, the units are available as standard
configurations or they can be tailored for a specific
application as a made-to-order unit�
OPTIONS:
(Items underlined are factory installed):
• Powder Coated Cabinet
• Plenum w/ Discharge Grilles or Duct Flange
• Condensate Pump
• Electric Heat
• Protective Coil Coatings
• SCR Controllers
• Air or Water Side Economizer
• Hot Water, Chilled Water and Steam Coils
• Variable Frequency Drive (Evaporator)
•
Drain Pan Overflow Switch
• Head Pressure Control Valves
• Double Wall Construction (Solid or Perforated)
or Acoustic Foam Package
• Hot Gas Bypass (Standard or Modulating)
• Low Ambient Operation (VFD or Flooded
Condenser)
• Freezestat
• Non-Fused Disconnects
• Thermostats
• Marvel Microprocessor Controls
• Upgraded Motors / Drive Sets
• Compressor Anti-Short Cycle Timer
• Quench Valve w/ Suction Accumulator
• Suction Line Accumulator
• Oil Separator
• Liquid Receivers
• Hot Gas Reheat
• Condenser Filter Box
• Return Air Grilles
• Chilled Water and Hot Water Valves
• Smoke Detectors
• Firestats
• Dry Contacts
•
Steam Canister Humidifier
CONTACT THE FACTORY FOR OTHER
OPTIONAL FEATURES
Summary of Contents for VertiCool Classic Series
Page 29: ...Engineering Guide VertiCool Classic 29 Subject to change without notice 20 10 TD 0816 NOTES ...
Page 30: ...Engineering Guide VertiCool Classic 30 Subject to change without notice 20 10 TD 0816 NOTES ...
Page 31: ...Engineering Guide VertiCool Classic 31 Subject to change without notice 20 10 TD 0816 NOTES ...
