Unit USP-1150D, User Manual

Page: 8 / 44

USP-1150D | MULTI COOKER | USER MANUAL
8
Set in a bowl to prepare the nozzle for stirring, and then add the necessary
products. Close the bowl of glass lid. The “Menu” button to select “Porridge”,
the program will start after 5 seconds.
How to use your multi cooker to cook Pulses
Before cooking legumes should be rinse with water. Put 100 g of legumes (beans,
lentils, etc.) in a bowl to prepare, add 500 ml. of water. Close the bowl of glass lid.
The “Menu” button to select “Legumes”, the program will start after 5 seconds.
After completion of the cooking process used the water must be drain from the
bowl and rinse beans.
How to use your multi cooker to make Stews
Follow the directions described for “Slow cook”. Do not forget to fry meat before
adding the other ingredients.
How to use your multi cooker to Roast
This mode is ideal for roasting meat and baking biscuits and casseroles. Grease
a bowl with a little oil. Place the required ingredients. Depending on the cooking
meals, you may need to remove the plastic valve from the glass lid. Close the
lid on the bowl. The “Menu” button, select the mode “Baking”, the program will
start after 5 seconds. In this mode, you can set the desired time. In the prepa-
ration of biscuits and casseroles, recommended using a silicone form USP-M
10 (sold separately).
How to use your multi cooker on the Meat function
Install the nozzle for stirring in the bowl for cooking, add a little oil. Place the
meat in a bowl, close of glass lid, and extracted from it a plastic valve. The
“Menu” button, select the mode “Meat”, the program will start after 5 seconds.
How to use your multi cooker for Risotto
Place in a bowl to prepare the nozzle for stirring, as the stirring mode is auto-
matically activated. Put in a bowl prepared ingredients. Close the cover. The