15
2
Key Operation
15
K
ey
O
pe
ra
tio
n
Chapter
2
2-3.
Selection procedure for the setting mode
Change the setting in the order of "Selection of setting mode"
→
"Selection of setting item"
→
"Registration of setting value".
■
Specified basic operation of setting mode and setting items
■
(Example 1: Setting from numerical value input)
Setting the balance weight value to 50 kg.
The balance weight value is item 1 in setting mode 3. (Refer to the setting mode calibration chart in
P.13.) The normal status (weight value display) is shown below
.
1.
Pressing the
key and
key in order will change the status to waiting for
input and the rightmost number will flash.
2.
Confirm the change by pressing the
key and the
key in order.
3.
Pressing the
key and the
key in order will change the status to waiting
for input and the balance weight value will flash.
→
→
→
[Selection of setting mode]
Press the key from 0 to 9
[Selection of setting item]
→
→
→
......Switches to the specified
(after switching to setting mode by performing the above procedure)
......Changes the setting
setting mode
that corresponds to the
setting mode number.
Use the keys to enter a
setting value for each
setting item.
Press the key from 0 to 9
that corresponds to the
setting item number.
kg
Current weight value
The normal status is setting mode 0.
The mode number is not displayed when in mode 0.
Setting mode number
Current setting mode number
Flashing means waiting for input.
kg
kg
The setting mode number after changing
Returns to weight value display after confirming.
The setting mode number is displayed on the left.
Balance weight value
kg
Setting mode number
Setting item number
The blinking moves to a lower order digit each
time a number is pressed. Once a number is
entered for the least significant digit, the most
significant digit will start to blink again and you
can re-do the settings.
Summary of Contents for F701+
Page 1: ...01AUG2020REV 1 03 WEIGHING INDICATOR F701 OPERATION MANUAL ...
Page 149: ......
