UNIPRO – The original Laptimer
18
Laptimer Overview
This chapter is covering the basic overview of the Laptimer. We will go through the unit and the
connectors so you can get familiar with the system.
About the Display Unit
The display unit is an ultra slim anodized aluminium casting. It is only 15 mm thick and only one
cable is going to the main box from the steering wheel.
Six buttons gives you quick access to all the functions. Five ultra bright LED Lamps are used for
both temperature warnings and RPM shift light.
IrDA is part of the display unit and enables wireless communication with the Unipro Data
Analyser.
The display unit has its own low power 16-bit processor to distribute the user interface from the
main box to the display unit.
The front of the display unit is completely sealed to make it waterproof. On the rear, a small hole
is allowing the pressure introduced with temperature changes to escape and at the same time
keep moisture out of the unit.
