UNIPRO – The original Laptimer
52
The split points can then be duplicated on other Laptimers. The split points can also be entered
manually in the Laptimer or can be transferred from the Data Analyser or the PC Analyser
program. In the PC Analyser software there is a Split Point Wizard you can use to set the split
points. This is a graphical way of setting the split points at the right places.
Time run mode
Time run mode is for breaking in new engines. This combines two functions:
1.
Hiding the lap times from the driver
2.
Start a stopwatch, showing the time driven with the engine
Time run mode is entered by pressing and holding
while turning the Laptimer on with a short press on
.
The display will show “RUN” in the display to indicate time
run mode. This will be shown all the time in firstlap mode.
When the finish line is passed for the first time, the display
change to show the engine stopwatch. This stopwatch is
running all the time the engine is started. No lap times or
delta times will be shown during the practice. However all
data is stored as usual, and can be viewed in pit mode. The
engine stopwatch will start from zero when the Laptimer is
changed to pit mode and back again.
Turn the Laptimer off when you want to leave time run mode.
