UNIPRO – The original Laptimer
21
TEMP 1
This 1-pin connector is for a PT1000 type temperature sensor. This is a high precision input used
for water and cylinder head temperature. Input range is 10
°
C to 610
°
C with a resolution of 0.1
°
C.
TEMP 2
This 1-pin connector is for a PT1000 type temperature sensor. This is a high precision input used
for water and cylinder head temperature. Input range is 10
°
C to 610
°
C with a resolution of 0.1
°
C.
TEMP 3
This 1-pin connector is for a NiCrNi type temperature sensor. This is a high temperature input
used for exhaust temperature. Input range is 0
°
C to 800
°
C with a resolution of 0.1
°
C.
RECV 1
This 1-pin connector is for a Loop or Magnet receiver. This will be the typical way of triggering the
Laptimer.
RECV 2
This 4-pin connector is for an IR receiver or other accessories. Used for IR receiver at present,
this connector can be used for other accessories in the future like two-way Loop receiver,
Telemetry and more.
AUX
This 4-pin connector is for extra sensors like G-force, Lambda, Power valve, etc.
USB
This 4-pin connector is for communication to a PC. This high-speed USB connection will transfer all
the data in a few seconds.
DISP
This is the cable is going to the display unit. The connector is located at the other end!
