Page 34
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
EMAIL – When the email reporting feature is activated ticking an item in
this column results in an email message being sent immediately.
12.5.2 Aux. Input Polarities
By selecting the NO or NC radio buttons for the AUX 3 input the ‘good’
condition can be set to either Normally Open or Normally Closed respectively.
NOTE THAT THE LVD AND FUSE SETTINGS ARE PRESET AND
SHOULD NOT BE CHANGED.
AUX 4 to AUX 8 are not fitted on the X100 system.
Once the required alarm and input polarity settings have been selected it is necessary
to click on the UPLOAD button to store the new settings in the unit’s memory. To
confirm that the new settings have been received and programmed click on the
REFRESH button and wait a few seconds for the unit to respond. If no changes are
apparent then the unit has been successfully reprogrammed.
To return the unit to the factory default settings click on the DEFAULT button