Page 15
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
10.4
Ethernet Connection – J1
The X100 is connected to a TCP/IP LAN (Local Area Network) or directly to a PC
using connector J1. This is a standard RJ45 network connector allowing connection
of any generally available Ethernet cable. Note that if the X100 is to be connected
directly to a PC rather than a LAN then a cross-over Ethernet cable will be required.
J3 CONNECTIONS
TERMINAL FUNCTION
1
TX +
2
TX -
3
RX +
4
Not Used
5
Not Used
6
RX -
7
Not Used
8
Not Used
Table 2 - Ethernet Connector Pin-Out
10.5
RS232 Console
This connector is reserved for UNIPOWER factory use.