Page 24
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
12.1
Controller Status
When the X100 is first accessed using a WEB browser the Controller Status page
shown below is downloaded.
Figure 5 - Controller Status WEB Page (typical)
This page presents two blocks of information. The top block displays a number
of system status parameters by mimicking a block of LEDs. 7 of these functions,
described earlier, are displayed on the front panel of the system unit.
The bottom block of information shows the following ‘live’ data:
Bus
Voltage
Battery
Current
Rectifier Current
Load
Current
Battery
Temperature
External
Temperature
Controller
Temperature
No. of Rectifiers Installed (includes all rectifiers that are present regardless
of status)
If the battery or external temperature probes are not connected a reading of 25ºC
will be displayed by default.
