Micro
ARE-M Series 24V Chargers, Single Phase
Setup and Operation
PM990-1070-24, Issue 12
4-13
AUTO EQUALIZE
SEL to setup
AC Fail Equalize
= DISABLED
Periodic Equalize
= DISABLED
6.
Press ESC to return to the
Temp
erature
Compensation
screen. Either press UP or DN to move to
another
Setup Select Screen
or press ESC until the
Home
screen appears.
4.3.4.3
Auto-Equalize
There are two Auto-Equalize modes: AC Fail Equalize and Periodic Equalize. Both are disabled by
default. Both or either may be enabled.
•
AC Fail Equalize will automatically switch the charger to equalize mode for a user-set time when
there has been no AC input to the charger for a period exceeding a user-set time.
•
Periodic Equalize causes the charger to switch to equalization mode for a user-set time after a user-set
time in float mode elapses.
To enable one or both Auto-Equalize modes:
1.
From the
Home
screen, press UP or DN until CHARGER SETUP
appears. Press SEL.
2.
At the
System Setpoints
screen
,
press UP or DN until the
Auto-
Equalize
screen appears.
3.
At the
Auto-Equalize
screen, press SEL. If the
AC Fail Equalize
screen appears, go to step 5. If the
Enter Password
screen
appears, go to step 4.
4.
At the
Enter Password
screen, press UP until your password appears and then press SEL. Go to step
5.
5.
At the
AC Fail, Equalize
screen, perform one of the following:
•
To enable AC Fail Equalize, press SEL. The equals sign will flash. Press UP to enable AC Fail,
Equalize and display the
AC Fail Equalize after
screen. Go to step 6.
•
To enable Periodic Equalize, go to step 8.
6.
At the
AC Fail Equalize after
screen, press UP to set the timer (1-7200 minutes). Press SEL. The
equals sign will stop flashing.
7.
Press DN to display the
AC Fail Equalize duration
screen. Press SEL. The equals sign will flash.
Press UP to set the time (1-150 hours). Press SEL. The equals sign will stop flashing.
8.
Press DN until the
Periodic Equalize
screen appears.
•
To enable Periodic Equalize, Press SEL. The equals sign will
flash. Press UP to display enable Periodic Equalize and
display the
Periodic Equalize every
screen. Go to step 9.
•
To exit Auto Equalize, go to step 11.
9.
At the
Periodic Equalize every
screen, press UP to set the time (168 to 8760 hours). Press SEL.
10.
Press DN to display the
Periodic Equalize duration
screen. Press SEL. The equals sign will flash.
Press UP to set the time (1-150 hours). Press SEL.
11.
Press ESC to return to the
Auto-Equalize
screen. Either press UP or DN to move to another
Setup
Select Screen
or press ESC until the
Home
screen appears.
To disable AC Fail-Equalize:
1.
At the
Home
screen, press UP or DN until CHARGER SETUP appears. Press SEL.
2.
At the
System Setpoints
screen
,
press UP or DN until the
Auto-Equalize
screen appears.
