Micro
ARE-M Series 24V Chargers, Single Phase
Front Matter
PM990-1070-24, Issue 12
iii
HANDLING
Refer to the product nameplate for the model information and then see the Specifications section for
charger dimensions and weight. Use sufficient personnel and power equipment to ensure safe handling.
WARNING
Crush hazard
The charger can weigh up to 216 lbs. (98 kg).
Keep hands and feet from beneath the charger.
Use a forklift or other equipment to move or
transport the charger.
AVERTISSEMENT
Risque d'écrasement
Le chargeur peut peser jusqu'à 216 lb. (98 kg).
Gardez les mains et les pieds libres du dessous du
chargeur.
Utilisez un chariot élévateur ou autres équipements
pour déplacer ou transporter le chargeur.
Use care in handling and unpacking the charger. Refer to the previous sections as needed.
NAMEPLATE
A UNIPOWER, LLC product is identified by a nameplate that includes model number, part number, and
serial number information, as appropriate. Please include this information in all correspondence with
UNIPOWER, LLC A sample nameplate is shown below.
MODEL NO. ARE-M02406
SER.NO. APS0719978
AC VOLTS 120/208/240
PH 1 HZ 60
DC VOLTS 26.4
SPEC. 102.1041.00A
°T C 50
AC AMPS 2/1.2/1
CELLS 12
DC AMPS 6
TECHNICAL SUPPORT
CALL FIELD SERVICE
EMERGENCY
INITIAL SETTINGS
All equipment is shipped from the factory fully inspected and adjusted. Read the technical reference or
product manual before installing or making any adjustments.
SPARE PARTS
See Table 6-2 Parts Lists to select the spare and replacement parts you want immediately available to
minimize downtime should a failure occur.
