Micro
ARE-M Series 24V Chargers, Single Phase
Introduction
PM990-1070-24, Issue 12
1-4
SPECIFICATIONS
1.3
This section provides the mechanical, electrical, and environmental specifications. The charger nameplate
is located on the front panel.
1.3.1 Mechanical
Cabinet .................................................... NEMA1; steel with baked powder coat finish
Cable Entrances ...................................... Three; see the dimension drawings in Chapter 2 Installation
Cabinet Dimension and Weight .............. See the following table and dimension drawings in Chapter 2
Installation.
Model
Cabinet
Size
Height*
Width*
Depth
Maximum*
Mounting
Depth**
Shipping
Weight*
ARE-M02406
ARE-M02412
ARE-M02425
12"
12.25
(311)
17
(432)
15
(381)
6
(152)
65 (30)
75(33)
102 (46)
ARE-M02450
ARE-M24100
24"
24.5
(622)
17
(432)
15
(381)
6
(152)
162 (74)
216 (98)
*Cabinet dimension in inches (mm). Does not include mounting brackets or drip shield. Weight in
lbs. (kg).
** Dimension from cabinet front to installed rack mounting angle brackets.
Mounting Locations ........................... Wall, relay rack, or floor
Select a location for the charger. The chargers are cooled by natural convection and require at least 3"
(76mm) of space below the charger and 3" above the charger.
Mounting Brackets
Supplied ........................................ Wall mount and standard relay rack mount
Optional ........................................ Larger relay rack mount or floor mount
Internal Combustible Materials ......... 94V-1 or better
