Unigas RG1025, Manual Of Installation, Use And Maintenance

Page: 31 / 40

C.I.B. UNIGAS - M039144CD
31
Removing the oil gun
1 remove the combustion head, as described on the previous paragraph;
2 slacken the screw VB
3 remove the gun with the nozzle holder
4 to rreassemble follow the procedure above in the reversed order.
Fig. 24
Electrode and nozzle position setting
To guarantee a good ignition, the masures below (in mm) must be observed (Fig. 25).
Fig. 25
ATTENTION: avoid the ignition and detection electrodes to contact metallic parts (blast tube, head, etc.), otherwise the boi-
ler’s operation would be compromised. Check the electrodes position after any intervention on the combustion head.
A= 8 mm
B= 3 mm
C= 8 mm
VB
E
A
B
C