Unify OpenScape Desk Phone IP 55G Page 78 User Manual Download

Page: 78 / 267

Call forwarding

Activating or deactivating immediate call forwarding

Press the key shown.

Deactivating call forwarding

If call forwarding was activated – the

Forward

key is lighting – it will now be au-

tomatically deactivated.

Activating forwarding to last destination

The message:

Set forward on to

" is displayed with the last forwarding destination used and

the Softkey-Liste offers the following options:
• Accept
• Enter dest.
• Settings
• Cancel

Using last forwarding destination

Confirm with the softkey to use the last saved destination for

Unconditional

again. Call forwarding to this destination is immediately activated for

Uncondi-

tional

and the

Forward

key illuminates.

If you do not confirm call forwarding immediately, it will be enabled automatically
after approx. 3 seconds.

Activating with variable destination phone numbers

If you want to use a new forwarding destination:
Select the softkey to confirm.



Enter and confirm the new destination phone number.



Confirm the saved destination phone number with the softkey (displayed).

Call forwarding to this destination is immediately activated for

Unconditional

and the

Forward

key illuminates.

Forward

Enter dest.

3339

Summary of Contents for OpenScape Desk Phone IP 55G












































































































































































































































































Search results

Summary of Contents for OpenScape Desk Phone IP 55G

Reviews:

Related manuals for OpenScape Desk Phone IP 55G

Brands by name

Popular brands

Unify OpenScape Desk Phone IP 55G, User Manual

Search results

Summary of Contents for OpenScape Desk Phone IP 55G

Reviews:

Related manuals for OpenScape Desk Phone IP 55G

Brands by name

Popular brands