manualshive.com logo in svg

Unify OpenScape Desk Phone IP 55G, User Manual, Page: 235 / 267

Share
Download
Unify OpenScape Desk Phone IP 55G User Manual Download Page 235

Backup/restore

235

Deleting a user backup on a storage 
medium

You can delete invalid or older backups on your USB medium. 

Press the key shown until the "Settings" tab is active.
Confirm the option shown.

if nec. 

j

Enter and confirm the user password.

Select and confirm the option shown.

Select and confirm the option shown.

Select and confirm the backup you want.

Select the softkey to confirm. A security prompt is displayed:

Delete backup 17.08.12 14:42 August 3770?

Select the softkey to confirm the option shown and delete the backup. Deletion 
of backups is the responsibility of the user and is therefore not password-pro-
tected.

Services

User

Phone

Backup/Restore

17.08.07 14:42 August 3770

Delete

Delete

Summary of Contents for OpenScape Desk Phone IP 55G












































































































































































































































































Reviews:

No comments