![background image](http://html.mh-extra.com/html/uniden/xdect-6135btu-series/xdect-6135btu-series_owners-manual_841507035.webp)
33
Note: Mounting the phone directly on the wall
• Be sure the wall is capable of supporting the weight of the phone, and
use the proper type of anchoring device for the wall material.
• Insert two #10 screws (minimum length of 35mm, not supplied) into the
wall, 100mm apart.
• Leave the screw heads 3mm away from the wall to allow room for
mounting the phone.
• Align the mounting slots over the screws and slide the base down into
place as shown above.
Place the mounting
slots over the pins
on the wall plate.
Slide the base
down to lock it
into place.
Wall plate
At the bottom of the base, lift up on
the release latch between the two
bottom tabs and push the bracket up.
Removing the wall-mount bracket
(To AC outlet)
Release latch
Mounting the base unit on a wall
This phone can be mounted on any standard telephone wall plate.
Route the AC adapter
and the telephone
cord through the
hole of the wall
mount bracket.
Line up the four tabs on the wall
mount bracket (two at the top and two
at the bottom) with the four notches
on the bottom of the base. Slide the
bracket into place.
Plug the telephone cord into the wall jack.
Hook both sides of the telephone cord into
the larger notch OR tuck the excess cord
into the open space in the bracket.
Connect the AC adapter
and the telephone cords
as shown below.
Remember to route the
AC adapter cord through
the channel.
Hook the AC adapter
cord into the smaller
notch at the bottom
of the bracket, and
let the cord hang
below the bracket.
(Bottom of the base)
(To AC outlet)
XDECT6135BTU.indd 33
21/02/12 1:07 PM