18
adding Phonebook Entries (home only)
With the phone in standby, open the phonebook. Select
Home
and then
Create New.
Enter a name and number and select a personal ring.
♦
Enter the phone number (up to 32 digits) exactly as you would dial it.
♦
If you need the phone to wait before sending the next set of digits,
press
redIal/pause
to insert a 2-second pause. You can insert multiple
pauses, but each one counts as a digit (you’ll see
P
in the display).
♦
To edit the name, press
pHoneBook
to move the cursor back and insert
a letter. Press
Intercom/clear
to delete a letter.
♦
To edit the number, press
Intercom/clear
to back up the cursor and
delete numbers. Re-enter the correct numbers.
Deleting all the Phonebook Entries
With the phone in standby, open the phonebook. Select the phone
name
and then
Delete All
. To confirm, select
Yes
.
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Make your call normally.
2. When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
3. Press
menu/select
twice to send the code. If you change your mind,
just close the phonebook.
XDECT6135BTU.indd 18
21/02/12 1:07 PM
