26
Using the System while You're away from home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Ans. Setup
, then
select
Security Code
. Use the number keypad to enter a two-digit
security code (
00
to
99
). Press
menu/select
when you’re finished.
#
remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number and wait until the system answers. (If the
system is turned off, it answers after 15 rings and sounds a series of
beeps.)
2. During the greeting or beeps, press
#
and
immediately
enter your
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number of messages in memory,
and a help prompt. It beeps to let you know it's waiting for a command.
4. When you hear beeping, enter a 2-digit command from the chart.
#
If you don't press any keys for 15 seconds, the system hangs up and
return to standby.
#1 Repeat message
#5 Stop playback
#2 Play message
#6 Turn the system on
#3 Skip message
#9 Turn the system off
#4 Delete message
#0 Hear help prompts
XDECT6135BTU.indd 26
21/02/12 1:07 PM
