manualshive.com logo in svg

Uniden XDECT 6135BTU Series, Owner'S Manual

Share
Download
Uniden XDECT 6135BTU Series Owner'S Manual Download Page 33

31

adapter and Battery Information

aC adapter

Base

Charger

Part number

AAD-6135

AAD-600S(M)

Input voltage

240V AC, 50Hz

240V AC, 50Hz

Output voltage

6V DC @ 500mA
7V DC @800mA

9V DC @ 210mA

 

♦

Use only the supplied AC adapters.

 

♦

Use the proper adapter for the base and any chargers.

 

♦

Do not place the unit in direct sunlight or subject it to high 
temperatures.

Battery pack (with normal use)
Part number

BT-694 or BT-694s

Capacity

650mAh (BT-694) or 500mAh (BT-694s)

Talk time

about 10 hours

Standby time

about 7 days

Battery life

about 1 year

 

♦

Replace the battery when the talk or standby time becomes 
noticeably reduced. For replacements, visit the online shop on our 
website (see the front cover).

 

♦

When the battery gets low, the handset beeps and shows a low 
battery alert; put the handset in the cradle for recharging. 

rechargeable Battery warning

 

♦

This equipment contains a rechargeable Nickel-Metal-Hydride (Ni-
MH) battery. 

 

♦

Do not short-circuit the battery.

 

♦

The batteries in this equipment may explode if disposed of in a fire. 

 

♦

Do not charge the batteries in any charger other than the one 
specified in the owner's manual. Using another charger may damage 
the battery or cause it to explode. 

rechargeable batteries must be recycled or disposed of properly.
Uniden works to reduce lead content in our products and accessories.

XDECT6135BTU.indd   31

21/02/12   1:07 PM

Summary of Contents for XDECT 6135BTU Series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands