Uniden TRU548, Owner'S Manual

Page: 18 / 68

G E T T I N G S TA R T E D [ 12 ]
Direct wall plate mounting
If you don’t have a standard wall plate, you can mount
your phone directly to the wall. Before doing this,
consider the following:
• Avoid electrical cables, pipes, or other items behind
the mounting location that could cause a hazard when
inserting screws into the wall.
• Try to mount your phone within 10 - 15 feet of a
working phone jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting
the weight of the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with
anchoring devices suitable for the wall material where
the base unit will be placed.
1 Insert two mounting screws into the wall, (with their
appropriate anchoring device), 1/8 inches apart. Allow
about 3/16 of an inch between the wall and
screwheads for mounting the phone.
2 Set the retainer clip if necessary.
3 Refer to steps 1 through 7 on page 11 to mount the
telephone.
TRU548 ENG O/M 7/18/01 15:39 Page 12