Uniden TRU548, Owner'S Manual

Page: 48 / 68

[ 42 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E
Using Your Answering System
Playing your messages
The base LED display shows the number of total messages. If the display is
blinking, then there are new messages waiting for you. The TRU548 is
designed to play your new messages first. After you play your new messages
you can then play your old messages.
1 Press . The system announces the number of new and old messages,
then the incoming messages are played. The time and day each message
was received is announced after the message is played.
2 When all new messages have played, a tone is heard. The message counter
LED stops flashing to indicate that all of the new messages have been
reviewed.
3 After you have reviewed all your new messages, you can play your old
messages. Press
and follow the instructions above.
Repeating a message
1 Press to review your message. The number of stored messages is
announced.
2 After a message has played for more than two seconds, (four seconds for
remote access) press
to repeat the message. If you press
before
two seconds (four seconds for remote access) the system repeats the
previous message.
3 Press at any time to stop reviewing messages and return to standby.
• To stop playing your
messages, press
again.
• If you have several
messages, press and
hold until
you
return to the message
you want to replay.
TRU548 ENG O/M 7/18/01 15:43 Page 42