Uniden TRU548, Owner'S Manual

Page: 17 / 68

[ 11 ]
GETTING ST
ARTED
Mounting the base unit on a wall
Setting the handset retainer clip for wall mounting
1 1 On the base unit, pull the handset retainer out of the
slot. Rotate it clockwise 180 degrees.
2 2 Flip the retainer from front to back. Slide it back into
the slot so that the lip of the retainer is up and the oval
is down. The retainer holds the handset in place.
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1 1 Snap the wall mount adapter into the notches on
the base.
2 2 Plug the AC adapter to the D DCC IIN N 9 9V V jack. Route the
AC adapter cord inside the molded wiring channel as
shown.
3 3 Plug the AC adapter into a standard 120V AC wall
outlet.
4 4 Plug the telephone line cord into the TTEELL LLIIN NEE
jack. Route
the cord inside the molded wiring channel as shown.
5 5 Plug the telephone line cord into the telephone outlet.
6 6 Raise the antenna to a ver tical position.
7 7 Align the mounting slots on the base with the mounting
posts on the wall. Push in and down until the phone is
firmly seated.
1
4
2
6
5
7
7
3
G E T T I N G S TA R T E D
Do not use an outlet
controlled by a wall
switch.
TRU548 ENG O/M 7/18/01 15:39 Page 11